Feeds:
Posts
Comments

Posts Tagged ‘Tek-Wipe’

Tek-Wipe is a new treatment material that has been much discussed by conservators during the annual meeting of the American Institute for Conservation and beyond. TekWipe is a reusable substitute for the blotter paper typically used in washing treatments. Conservators have used Tek-Wipe to dramatically reduce stains and tidelines in paper, as recently discussed in an Iowa State University Library blog.

TSLAC Conservation was curious whether the detailed methodology of the ISU blog could be successfully repeated. In February, one sheet of a Confederate muster roll exhibited unusually pervasive staining and tidelines. A Tek-Wipe washing component was added to our ongoing muster roll treatment procedures in order to observe its effect on the staining.

Muster roll sheet before treatment.

Muster roll sheet before treatment.

The treatment began typically for our muster roll project. The item was humidified and sprayed with a 50/50 water/ethanol mixture due to iron gall ink corrosion. It was then placed in two successive 10-minute water baths, the second one conditioned to pH 8.5 with calcium hydroxide. The treatment procedure was then adjusted to incorporate Tek-Wipe. The item was sandwiched between damp blotter, Tek-Wipe, and spun polyester for two hours, as detailed in the ISU blog. After the first hour, the pre-existing silk lining was removed from the document. The item was then dried in open air and with blotters. Japanese tissue fills and mends were applied with wheat starch paste, and the item was stored in an archival plastic sleeve.

Muster roll sheet after washing with TekWipe and water baths.

Muster roll sheet after washing with TekWipe and water baths.

This after-washing photograph shows that the Tek-Wipe treatment had a negligible impact on stains and tidelines. Why might this be? Many of the stains in this collection are oil-based and ink-based, rather than water-based as seen in the ISU methodology. It’s possible, then, that stains of this nature remain unaffected by water-based TekWipe washing. Further testing might identify a different solvent that has a greater impact than water. Such solvents would require careful testing to ensure media stability.

Until more formal, repeatable studies occur, informal observations like these can add to the conservation field’s growing knowledge of Tek-Wipe treatment procedures. With further testing, documentation, and information sharing, methodologies can evolve to meet treatment needs.

Advertisements

Read Full Post »